BRICK PAVER
Paths, Patios & More
Provided by the Brick Association of the Carolinas.

STEP 1 Preparing Your Site
The first step in a sand-based installation is to remove enough soil to allow for 3-4" of "crusher-run" gravel (about 8" for a driveway), 1"-11/2" of "concrete" sand or stone screenings, and the thickness of your selected pavers. The excavated area should extend about 6" beyond the area you plan to pave to provide an adequate foundation and allow for proper drainage.

STEP 2 Compacting the Sub-Soil
After excavation is complete, the exposed sub-soil needs to be compacted, either by using a vibrating plate compactor (available from most equipment rental shops), or allowing the area to stand through several rains or soakings with a hose.

STEP 3 Gravel & Drainage more»